As with the majority of items, laptops degrade over time; as a result, do not be shocked if a component such as the power button stops working. It’s difficult to know How to Turn on a Gateway Laptop Without the Power Button, but I’ll cover some tips in this post.
You can either connect an external keyboard to Windows or enable wake-on-LAN for Windows to turn on/off a laptop that lacks a power button. With an extra keyboard, you can enter clamshell mode and wake up your Mac.
How to Turn on a Gateway Laptop Without the Power Button [Step By Step]
Before we go to the remedy, allow me to clarify that there may be several reasons why your laptop does not come on after many touches.
If the laptop does not power on after attempting the procedure described below, you must check additional laptop components to determine if they are damaged.
These methods are absolutely safe to use on your laptop as long as you follow them step by step and do not cause any damage to the device’s hardware.
How to Turn On Laptop without Power Button [From the Motherboard]
This approach is guaranteed to work on any laptop; even if the power button is entirely broken, this method will enable your laptop.
Thus, how to do it is explained step by step.
1) Disconnect the charging wire from your laptop.
2) Remove the laptop’s case and locate the power button.
3) Remove the button.
4) Three to six pins will be located behind the button.
5) Use wire pins to connect the wires or any driver such as a screwdriver.
6) Once the pins are connected to the driver, the laptop is activated.
7) You are now finished.
Note: If your laptop’s battery is dead and you wish to connect it to the adapter’s AC (Alternate Current), proceed with caution and I recommend connecting your laptop’s pins with a screwdriver.
Additionally, you can view the video to gain a better understanding:
- How to power on a Windows laptop equipped with an external keyboard that lacks a power button
- Using a keyboard to power a laptop is a common configuration for the majority of laptops. This is, however, still deactivated by default. Until the power button becomes defective, the consumer or owner should have taken preventative measures to ensure the tool’s operation.
Adding the ability to utilize an additional laptop keyboard
To enable the use of an external keyboard on a laptop, you must first visit the BIOS settings. The following measures are discussed in detail:
Step 1a: When starting with F2, enter BIOS settings.
When your computer boots, you can reach the advanced menu by using either the “F2” or “DEL” key.
Or
Step 1b: While the computer is booting, press F2 to access the BIOS settings.
Rather than restarting, you can access the BIOS settings by doing the following steps:
Step 1b.1: From the “Start” menu option, select “Settings.”
Step 1b.2. Select the “Update & Security” option.
Step 1b.3: On the left, read the options and select “Recovery.”
Step 1b.4: A two-section tab will open.
Step 1b.5: Select “Restart Now” from the “Advanced Setup” menu.
Step 1b.6. A new window is being created
Step 1b.7: Select “Troubleshoot”
Step 1b.8. Select ‘advanced options’
Step 2: Click ‘Enter’ on the ‘Power Management’ or ‘ACPI Management’ tab.
Step 3: Verify the “Keyboard Power” or “Keyboard Wake” or similar setting.
Step 4: To activate the choice, press the “+” or “-” key.
Step 5: Select a desired laptop power key
Step 6: Using the F10 key, save and exit.
Following the preceding stages, it is necessary to test that the settings perform properly.
Verifying the keyboard’s functionality
Step 1: Shut down the Windows operating system
Step 2: When the computer is turned off, press the key you’ve chosen to restart it.
How to Turn On Laptop without Power Button [With Wall Socket or Extension]

If you use a brand laptop such as HP, Dell, Toshiba, ASUS, Acer, or Lenovo, this function will work flawlessly.
This is also an alternative for individuals who do not wish to shorten their laptop in order to turn it on without the need of a power button.
Guide in Easy Steps
- Locate the cable that connects the motherboard’s power button to the power supply.
- Unplug and disconnect the cord
- Incorporate the battery
- Connect the laptop’s power cord to the socket.
- If you want to disable the power socket, connect the laptop’s battery.
- Nota bene: You may need to enter your laptop’s BIOS to activate it when connected to AC power.
- Using Windows 10 to Enable Wake-On-LAN
- As with the keyboard option for awakening a laptop, the LAN option requires that the BIOS be enabled in advance.
How to enable Wake-On-LAN functionality in the BIOS
Step 1a: When starting with F2, enter BIOS settings.
When your computer boots, you can reach the advanced menu by using either the “F2” or “DEL” key.
Or
Step 1b: While the computer is booting, press F2 to access the BIOS settings.
Rather than restarting, you can access the BIOS settings by doing the following steps:
Step 1b.1: From the “Start” menu option, select “Settings.”
Step 1b.2. Select the “Update & Security” option
Step 1b.3: On the left, read the options and select “Recovery.”
Step 1b.4: A two-section tab will open.
Step 1b.5: Select “Restart Now” from the “Advanced Setup” menu.
Step 1b. A new window is being created
Step 1b.7: Select “Troubleshoot”
Step 1b.8. Select ‘advanced options’
Step 2: Click ‘Enter’ on the ‘Power Management’ or ‘ACPI Management’ tab.
Step 3: Look for a “Power On LAN” or “Wake On LAN” setting.
- To enable selection, use the “+” or “-” negative key.
Step 4: Select a favourite power key for the laptop.
Step 5: Using the F10 key, save and exit.
After completing the preceding procedures, configure the network card so that it can control the device.
Configuration of the Network Card
Step 1. To begin, right-click on “Start.”
Step 2: Select the “Device Manager” option.
Step 3: Wait for the “System Manager” to open.
Step 4: Conduct a search for “Capabilities Network.”
Step 5: Right-click on the menu.
Step 6: Select the “Properties” option.
Step 7: Select the “Power Management” tab from the menu bar.
Allow the machine to wake up to this unit by checking the “Allow the machine to wake up to this unit” box.
Checking to See if the LAN Works Wake-On
Step 1: Shut down the Windows operating system
Step 2: Reconnect to the LAN to reactivate it once it has been turned off.
It is critical to remember that the wake-on-LAN and network configurations are determined by the motherboard setup.
How to Turn on a Gateway Laptop Without the Power Button Using Clock battery Method
If the power button on your laptop fails to operate and you need to complete the work immediately, you can utilise the clock battery to power your laptop.
This method requires you to start your laptop by following the steps below.
- Take the battery cable away from the motherboard (not charging cable).
- Deactivate the motherboard’s clock battery.
- This indicates that your laptop has run out of power and that it will boot from any available power source. Then connect the battery, keeping in mind that the battery is irrelevant while connecting the laptop to its charger.
How to Turn On Laptop without Power Button [With Lid]
Assume you wish to turn your laptop to Lid mode without pressing the power button. Then this option enables you to power on and off your computers via the Lid.
While the deck is closed, the laptop sleeps; however, you can adjust this to switch it off and on.
Guide in Simple Steps
- After your laptop has been powered on, use the F2 or Del key to access the BIOS settings.
- Navigate to the advanced tab and select power control.
- In power management, look for the option “power on open deck.”
- Adjust the setup to power on/off the laptop with the lid open.
- How does a Laptop with a Power Button work?
- You must guarantee that the laptop is powered by a battery or that the gadget is linked to a power supply. Each of these two sources provides electricity that circulates through the circuits of the laptop.
The power button, on the other hand, deactivates a specific point of electricity.
However, when the power button is hit, the energy outlet opens, allowing electricity to flow to the second laptop. When the same button is hit again, the laptop returns to sleep.
Is It Possible To Install A New Power Button?
Yes, if the previous one develops a malfunction, you can replace it on your laptop. If you like to perform the installation yourself, follow these steps:
Step 1: Disconnect the battery, the AC adapter, and the rear panel.
Step 2. Remove the RAM and hard disc
Step 3: Remove the keyboard’s bezel.
Step 4. Remove the keypads
Step 5. Remove the top frame and look for the power converter.
Step 6: Remove the old button and replace it with the new one.
Step 7. Deassemble the laptops
FAQs ― How to Turn on a Gateway Laptop Without the Power Button?
How do I turn on my computer if the power button doesn’t work?
One thing you might try is to completely disconnect the power supply, press and hold the power button for 15-30 seconds, and then reconnect the power supply to see if it turns on.
Why will my PC not turn on?
If your computer does not turn on – there are no fans running, no flashing lights, and nothing on the screen – you almost certainly have a power problem. Unplug and reconnect your gadget to a wall socket that you are certain works, rather than a power strip or battery backup that may fail.
How do I know if my power button is broken?
Begin by unplugging the power switch on your motherboard. Take a flat head screwdriver and press it on the two pins for 1-2 seconds to secure the power switch. If the gadget powers on, the power button is malfunctioning; otherwise, you may wish to do the paper clip test on your power supply.
How do I fix my Gateway computer that won’t turn on?
Conduct a hard reset by removing the battery and AC adapter and then pushing and holding the power button for 20 seconds to ensure that the computer restarts normally following the reset. – Once you’ve verified that the AC adaptor is functioning properly, replace it with another of the same voltage to see if it helps.
Conclusion
If your laptop does not power on or off after numerous efforts using the power button, it may be time to consider other options. Utilize the steps listed above to resolve your issue. If none of them work, the problem may extend beyond the power button.
Your machine may also have additional hardware difficulties, such as a lack of power storage or a CPU breakdown. In this scenario, you may need to seek out specialised technicians to diagnose the problem.