Update your Asus computers on a regular basis. Anything that is left alone for an extended period of time will almost certainly fail. Additionally, Asus hardware may require replacement on occasion.
It is impossible to accomplish without prior understanding of laptop disassembly. Due to the design of the Asus laptops, there is no room for serious work.
How to Take Apart Asus Laptop [ STEP BY STEP GUIDE ]
Step 1: Turn off the laptop, disconnect all accessories, and unhook the power cord. Once your laptop has been properly shut down, place it face down on a flat surface. Turn the laptop on its front end to ensure proper viewing of the screen.
Locate the battery compartment cover on the bottom of the laptop. To remove the battery cover safely, press the tabs together and then slide it off the battery. Set aside the battery pack.
Step 2: Remove all screws that secure the laptop’s bottom case in place. To begin, unhook all of the cable connectors on the laptop’s underside. This task varies in complexity depending on the system.
Many recent Asus laptops have the majority of their components mounted on the base of the machine rather than the motherboard.
It can be reached via the bottom of the laptop’s hardware, depending on the model; however, only the RAM, modem, and wireless cards can be accessed.
Step 3: At this point, you should be able to separate the LCD from your laptop. Disconnect the top-row locking tabs on the keyboard. To pick up the keyboard, grip the upper edge and then turn it in the direction of your hand.
Following that, place the keyboard on its face. To unscrew the keyboard and separate it from the motherboard through the ribbon cable.
Step 4: The next step is to undo the screws that secure the laptop’s metal cover to the case. Locate and insert the trackpad cable into the receptacle for the trackpad.
A tiny, thin screwdriver should be placed towards the bottom of the laptop’s touchpad. Act along the perimeter of the laptop to take off the top casing. Disconnect the LCD hinge clips. Remove the entire laptop case. The motherboards will be revealed in their entirety.
How to disassemble Asus VivoBook 15 F512 X512
Disassembling an ASUS VivoBook 15 F512, commonly known as dismantling an ASUS VivoBook. It should work with the following Asus VivoBook 15 models: X512F, X512DA, X512FL, X512FJ, X512UA, X512DK, X512FA, X512FB, F512DA, F512FA, X512UB, and X512UF; but, I’m rather certain it will work with others as well.
The VivoBook 15 F512 supports two SATA hard drives: one is an M.2 SSD and the other is a 2.5-inch hard disc.
- Upgrades to the system’s RAM can be made only in one location.
- It’s simple to remove and clean.
- DC jack glued to the motherboard
- This disassembly requires only three simple tools: a Phillips screwdriver, a case knife, and tweezers. If you’re interested in learning more about my series of electronic repairs, the following are the tools I utilise.
How to Take Apart Asus Laptop (Brief Explanation)
STEP 1. Remove the ten screws that secure the bottom cover. There are three types of tornadoes: orange tornadoes are the longest, red tornadoes are the medium-length, and green tornadoes are the shortest.
STEP 2. Pry the base cover-up away from the top casing.
STEP 3. Remove your hands from the base cover in the same manner as before. To remove the lid, you must use appropriate force. Numerous concealed locks are mounted on the top case.
STEP 4. Unscrew the four battery and bracket attachment screws and remove the bracket. Under the first severed touchpad cable, the battery cable is routed.
STEP 5. Disconnect the touchpad cable from the motherboard.
The connector must be opened prior to severing the cord. Raise the locking tab on your connector to release it (red arrow).
STEP 6. Unlock the battery cable connector and disconnect it from the motherboard. Glide the metal clip in the indicated direction (yellow arrow). This clip conceals the battery connection cord.
Now that the battery wire has been removed from the motherboard, it may be lifted and unplugged. Avoid using metal tools to elevate the connection. By accident, you can shorten pins and damage your battery or motherboard. Rather than that, use your fingernails.
STEP 7. The speaker cables and Wi-Fi antenna cables are routed on the battery’s side. All battery cables should be separated.
STEP 8. Disassemble the top case and remove the battery. The battery is secured to the left of two knobs. Assemble it properly during the reassembly procedure.
The Asus VivoBook 15 F512 X512 motherboard features a non-removable 4GB (soldered) memory module and one RAM slot supporting up to 16GB DDR4 memory modules. The greatest amount of RAM available on a laptop is 20GB.
STEP 9. Disconnect the memory module and, if possible, replace it with a larger capacity memory module.
STEP 10. Unscrew the M.2 SATA SSD screw and carefully pull out the SSD. It is a 2280 M.2 SSD in M.2 form factor.
STEP 11: Disconnect the 2.5-inch SATA hard drive wire from the motherboard. Remove the cable from the connector by unlocking it.
STEP 12: Disconnect the laptop’s 2.5-inch hard disc. It is a normal 1TB 2.5-inch rotating SATA hard disc. I would strongly encourage you to replace it with a 2.5′′ solid state drive that is far faster. When you upgrade the hard drive, you must move the SATA cable and rubber sleeve to the new drive.
STEP 13: Remove three locking screws from the cooling fan. Disconnect the USB fan cable from the board.
STEP 14: Disconnect and elevate the cooling fan.
STEP 15. Unplug the video cable from beneath the padding foam. Remove the cushioning foam from the rim. Remove the transparent tape and remove the video monitor cable from the motherboard.
STEP 16. Rotate the display panel 90 degrees and place the laptop upside down on the edge of the desk. Remove four screws from the display hinges.
STEP 17: The display panel can now be detached and removed from the top case assembly.
I do not demonstrate how to remove the LCD panel in this instruction, but it should not be difficult. I believe that removing the screen is quite standard:
- Remove two bottoms left and any necessary screws from the corners of the display assembly.
- Remove the screen from the bezel.
- Remove any password-protected device screens.
- Disconnect the cable from the screen’s back.
- Disassembly of the USB board and motherboard
STEP 18. Disconnect the USB I/O cable from the board.
STEP 19: Lift up and remove the USB board.
STEP 20. Remove all screws from the motherboard and disconnect the following cables:
- Cable for speakers.
- Cable for the keyboard’s backlight.
- Cable for touchpad.
- Cable for keyboard.
- Step 20: Remove the USB board and the motherboard
- Additionally, the Wi-Fi card should be removed.
The motherboard can now be detached and removed from the top case.
Step 21: The motherboard’s power jack DC-IN has been soldered. If it fails, the failed DC jack must be soldered and replaced.Unscrew the screw that holds the touch pad in place and remove two wires. Take away the touchpad. The keyboard is permanently attached to the top case and cannot be removed (connected). If the keyboard does not function properly, the entire top case assembly must be replaced.
FAQs ― How to Take Apart Asus Laptop?
Do ASUS laptops have removable batteries?
To be sure, both batteries are removable, but not ‘easy.’ If your equipment is still covered by the manufacturer’s warranty, you should contact the manufacturer regarding the issue. If the guarantee is not available, you can attempt the job yourself or bring it to a nearby store.
Can you take apart a laptop?
Disassembling and reassembling a laptop enables you to swap out components, clean up the system, or completely replace the laptop’s internal components.
How do you open the back of an ASUS TUF laptop?
Raise the seam of the rear cover with the iFixit opener, then put the spudger parallel to the rear cover and slowly lift up.
