When we lacked HDMI/AV monitors, we spent days attempting to work on the Raspberry Pi. The purpose of this is to allow individuals with similar laptops to ours to use their laptops as monitors for the RaspberryPi.
While the Raspberry Pi is often regarded as the “Pocket-Sized PC” for everyday work, carrying an external monitor for debugging and project purposes is difficult.
Additionally, for the majority of us, the HDMI display will be unavailable. We devised a technique for rapidly How to Connect Raspberry Pi to Laptop Using HDMI. Remain calm and follow along with this simple tutorial. That is precisely what we will require:
- Raspberry Pi.
- Micro USB Cable. (Optional)
- A Laptop.
- SD Card with Raspbian.
- Ethernet Cable.
If you’re installing it for the first time, you’ll need the following:
- Display AV/HDMI,
- Mouse & Keyboard
How to Connect Raspberry Pi to Laptop Using HDMI

Step 1: Configure your Raspberry Pi.
How exactly does it work?
You can connect your RaspberryPi to your laptop’s display through an Ethernet cable. The raspberry pi’s desktop GUI can be accessible through a 100Mbps ethernet connection between the two computers.
You can establish a connection between your laptop and the Raspberry Pi using a variety of apps. You’ll use the VNC application to connect your Raspberry Pi to your laptop.
By installing the VNC server on your raspberry pi, you may view your pi’s desktop remotely using your mouse and keyboard as if you were sitting in front of it. Additionally, you may locate your Raspberry Pi anywhere in your home and still control it.
Additionally, the internet can be shared through Ethernet from the laptop’s wireless connection. Additionally, you may use this adapter to connect to the internet and connect your Raspberry Pi to your laptop’s display.
Before connecting your Raspberry Pi to your laptop display, you’ll need an SD card with the operating system already loaded. SD card preparation is a popular topic, and there are numerous blog entries and videos available on the subject.
For novices, this free eBook on Raspberry Pi: The Beginner’s Guide is available. This post will teach you How to Connect Raspberry Pi to Laptop Using HDMI.
Once the SD card installation process is complete, please insert it into the Raspberry Pi. Following that, connect your micro USB cable to the pi and power it on.
Connect your RaspberryPi to the laptop through an ethernet cable while still in the main computer room. Connect the keyboard and mouse to complete the set.
Connect the HDMI display to the DVI monitor at this point (the HDMI is only required for running the pi for the first time).
Now connect your Raspberry Pi to a power source. Connect your Raspberry Pi to your laptop display by following the instructions below.
Step 2: Internet Sharing via Ethernet
Once you’ve figured out how to connect your laptop to the Raspberry Pi using an Ethernet cable, go to the next step.
The command for Windows is as follows: To connect more individuals to the internet through an Ethernet cable, navigate to the Network and Sharing Center. Once a wifi network has been selected, click the “Connect” button.
Click the Properties option to grant other network users permission to connect to your machine. To enable additional network users to connect, navigate to the Sharing tab and select the “Allow additional network users to connect” option. Rather than using any of the other networking connections, use the “Local Area Connection” networking setting.
Following these procedures will enable your computer to obtain a dynamic IP address, as well as all other devices connected to your laptop.
To verify the IP address assigned to your laptop, click on the Local Area Network icon.
Connection link that has just been created:
The following figure depicts my laptop’s IP address, which is 192.168.137.1. Perform the following task to determine the IP address assigned to the connected ethernet device.
When you know your laptop’s IP address is 192.168.137.1 and its subnet mask is 255.255.255.0, consider the following:
- Begin by opening a Command Prompt window.
- Ping your IP’s broadcast address. To begin, type ping 192.168.137.255.
- Maintain the ping running for an additional 5 seconds once the ping is complete.
- Ascertain that the gadget has responded. a femtosecond; a pulsar
Step 3: Configure the VNC Server to Connect the Raspberry Pi to the Laptop Monitor
If you have one, you will require an HDMI display. Connecting an HDMI monitor to your Raspberry Pi is required when installing a VNC server. To install VNC, use the following instructions in the LX-Terminal:
- apt-get update $ sudo
- apt-get install tightvncserver $ sudo apt-get install tightvncserver
As long as you have a display, you are safe. By connecting via SSH, you can use Putty to connect to your Raspberry Pi.
Use the same commands to install VNC on your Raspberry Pi. To begin the VNC Server on the Raspberry Pi, type “start vnc”. The following command is used to configure VNC on an SSH terminal:
- vncserver:1 $
You will be prompted to enter your password to get access to your account. This question will be asked just once during the initial setup process. Your password has eight digits.
Ensure that you use this password to access the Raspberry Pi from a remote location. It should be rejected to create a second “read-only” password (n).
I’m overjoyed! You can now connect to the Raspberry Pi’s VNC server. Before we can begin managing the Pi, we must first switch to the laptop from which the Pi will be controlled. After you’ve configured your VNC client, establish a VNC connection to the Pi.
Step 4: Client-Side Configuration (Laptop)
To install VNC, download and install the VNC client from here. When you launch VNC Viewer for the first time, you will see the following:
- Determine the raspberry pi’s IP address using your laptop’s IP address (you got the address from the earlier step). Then, incorporate By inputting a port number and clicking the connect button, you can connect to that port. By hitting “Continue,” you will be cautioned and requested to continue.
- Enter the eight-digit password that was created during the Raspberry Pi’s VNC server installation.
- When you connect to your desktop using VNC, it should appear on your screen as a VNC window. You’ll be able to access the GUI and conduct any tasks using the Pi’s keyboard, mouse, and monitor.
Because SSH is network-agnostic, the possibilities are limitless. Your Raspberry Pi can be installed in any location as long as it is connected to your network.
This means that in order to utilise your Raspberry Pi with anything, you must first connect it to your laptop through an ethernet cable and then supply electricity to it.
Once VNCViewer is open, enter the IP address of your Raspberry Pi. You can use the Raspberry Pi’s monitor by connecting your laptop’s display to the Raspberry Pi’s monitor.
How to connect Raspberry Pi to laptop without ethernet cable
- Etcher is used to write the Raspbian operating system image on your SD card.
- To display the little FAT32 sector on the SD card on your Windows or Mac PC, you must first remove and reinsert the SD card.
- Assign the file generated on the FAT32 partition the name ssh (or ssh.txt).
- How to use VNC to connect a Raspberry Pi to a laptop
- Open the VNC Server window on your Raspberry Pi. To enter the Experimental Direct Capture Mode, click “Troubleshooting” from the menu item “Options.” Utilize VNC Viewer to connect to the machine and take control.
How to connect Raspberry Pi to laptop using Putty
- Proceed with the download and installation of Putty. Putty.exe is a standalone executable that can be launched immediately.
- Connect to the Raspberry Pi via SSH, then select UTF-8 as the translation type under the “Window” menu item and then “Translation.”
- After clicking “Open,” you are ready to log in. The default user is referred to as pi.
FAQs ― How to Connect Raspberry Pi to Laptop Using HDMI
Can you use laptop as monitor for Raspberry Pi?
This idea of using the monitor and keyboard from your laptop or desktop computer as the display and keyboard for your Raspberry Pi is an excellent little hack. There is no soldering or additional equipment necessary; all that is required is a network cable.
How do I enable HDMI on Raspberry Pi?
1) Increase the processing power of your Raspberry Pi, then open a terminal window.
2) Open the Raspberry Pi configuration file for modification with the sudo nano /boot/config.txt command.
3) Continue down these three arrowed lines to the end of the file.
4) To save your work, use CTRL+O.
5) Exit the editor by pressing CTRL+X.
Can I connect Raspberry Pi 4 to laptop with USB?
To use wifi dongles, the Raspberry Pi should be hooked into a USB port. Connect your computer to the Raspberry Pi via an Ethernet connection, and then connect the other end to your router.
Connect the power adapter to the Raspberry Pi’s power port and then to a wall socket to turn it on. The Raspberry Pi will power up once the electrical socket is attached.
How do I connect my Raspberry Pi to my laptop without Ethernet?
Now that you’ve established an IP address, here’s how to utilise the headless Raspberry Pi with your Windows laptop without using an Ethernet cable or monitor. Go to Start > Run > Command Prompt on your Windows machine and type ssh pi@[IP Address]. Type yes and click enter to confirm the results of the command.