How Much Does It Cost to Replace a Laptop Keyboard?

If your laptop keyboard is sticky or missing keys, or if the keyboard is not working at all, you may be wondering how much does it cost to replace a laptop keyboard. You can often substitute the entire keypad for between $20 and $60.

The method is not as difficult as it appears and has the advantage of not requiring each key to be taken and replaced individually.

Although each laptop is unique, removing the keypad normally requires opening the case, removing a few screws, and disconnecting a cable.

If you are up to the task, you can easily complete this job at home. However, please keep in mind that removing a business laptop is a terrible waste, and Ranklaptop accepts no responsibility for any damage that may come to your computer as a result of the removal.

Additionally, if you need to open your laptop completely to replicate our operation, you can contact an expert if you need to remove more than a handful of screws.

Finally, before you do anything else, check to verify if the laptop is still covered by the manufacturer’s guarantee. If this is the case, you may be eligible for a free repair.

How Much Does It Cost to Replace a Laptop Keyboard? Pricing Table

Type of RepairPrice RangeType of RepairPrice Range
Keyboard Replacement$80-195Motherboard Replacement$150-300+
Laptop Screen Replacement$125-225+Memory/RAM Upgrade$50-200
Hard Drive Replacement$100-$225Software Repair$40-150
Data Recovery$99-1000+Fan Repair/Replacement$99-175
Power Jack Repair$100-200Liquid Damage Repair$99-250+
Virus Removal$49-100SSD Upgrade$150-400+

Disclaimer: Certain price ranges are indicated above. Take note that these price ranges reflect our industry’s labour expenses, which vary by sector.

Allowing “your uncle, who is knowledgeable about computers,” to fix your laptop may result in lower charges (but you could end up here anyway).

Uncle, hopefully, will not remove your data inadvertently either). Additionally, you may be quoted considerably higher by some of our competitors. These prices vary according to the difficulty of the job and the anticipated bench time, but they are reasonably priced for a respectable repair business.

Locate a suitable keyboard.

The initial step is to obtain the optimal keyboard for your laptop. Comparing prices on eBay, Google, and online repair hardware specialist stores such as LaptopKeyboard.com is a good idea.

Ascertain that the keyboard you are purchasing matches the precise model number on your laptop, which can be found on the bezel of the screen or on a sticker attached to the underside of the laptop.

You can narrow your search even more by providing the keypad’s part number, which can be found on the laptop manufacturer’s website or by contacting the service/support department.

How to Replace the Keyboard on a Laptop

How Much Does It Cost to Replace a Laptop Keyboard

Consult online for more precise instructions on changing your individual laptop keyboard than those provided here. There is a slim chance that your laptop is unique and requires a slightly different method of replacement than the standard one outlined.

Consult the maker of your laptop and the retailer where you obtained the replacement keyboard to determine whether they have exact do-it-yourself repair instructions.

Certain manufacturers provide thorough service manuals for a variety of maintenance tasks. If not, you might search the Web for “how to replace a keyboard” and your laptop’s model number.

Let us begin immediately! Ascertain that you have obtained the correct replacement by placing it on the laptop and examining its form and size.

Following that, gather your tools: a little Phillips screwdriver for removing the tiny screws and a butter knife or a small, thin flat tool for removing any cover.

Ascertain that the laptop is totally shut down: Removing the battery from the power cable is a good idea.

Examine the cover/trim piece that sits between the screen and the keyboard; the keypad is often accessible. Examine and remove any screws that appear to aid in the retention of the cover. Certain components frequently conceal the screen hinges with the use of tiny screws on their backs.

Prior to removing the lid, keep in mind that a data connection might be connected to the laptop’s rear. This cable is required and is normally not excessively slack.

Remove the trim piece that houses your laptop keyboard with extreme caution. You are not need to rip the laptop’s cord and damage the connection or connector.

When the cover is loose, gently cut the surface with your bare hands; pry it gently open with a butter knife or another thin flat object, if possible.

The cover can be snapped quite rapidly with a small amount of force – avoid using or breaking the cover with excessive power.

If the screw does not appear to be coming out, seek for any remaining screws, including those beneath the laptop, that are holding it together and remove them.

Remove the cover/cut piece and set it aside. If the data cable is linked to the laptop, attempt to remove it carefully without harming the cable.

Then locate and remove the screws that secure the keyboard; typically, there are two to five such screws on top of the keyboard.

Before you pull the keypad up, keep in mind that the rear of the keyboard is connected to the laptop via a data wire.

Generally, this cable is not very loose, so proceed with caution when drawing it up. It is critical that the cable does not come loose from the laptop and damage the connector.

Examine the keyboard carefully (without ripping the laptop cord) and open the cable connector, which is often accomplished by ticking the connector’s small lock. Then disconnect the data cable and discard the old keyboard.

Check the new keypad’s alignment, align it (without setting it down), then connect the data cord to the laptop’s connector, generally by inserting the flat cable all the way.

Set the keyboard in place using the associated data cable, taking care not to pull or damage the cable. Replacing the screws that hold the keyboard in place and reconnecting the cover/drive component, which typically requires some force to reinsert. If you previously removed screws from the lid, reinstall them as well.

After completing these steps, you can reinstall the battery and restart the laptop. If all goes according to plan, you should have a perfectly functional keyboard for a fraction of the cost of a trained repair service!

How Much Does It Cost to Replace a Laptop Keyboard?

It’s more difficult to repair a laptop keyboard since moisture can enter other critical circuits on the laptop and cause additional harm.

The first step is to turn off your laptop and remove the battery immediately. Then, while holding down the power button, confirm that no components of the laptop are charged. The sooner you shut down your laptop, the less risk of injury.

The following step is to disassemble and clean your laptop. The process for demounting your laptop varies according to its model.

Fortunately, practically every laptop model on the market offers decommissioning manuals, and the majority of laptops are designed specifically for easy disassembly (Click here to learn how to disassemble your laptop).

Certain computers, on the other hand, are more difficult to disassemble than others. Others, you’re likely to get by with a screwdriver. For some, you may require equipment that are often included in laptop repair kits.

iFixit is another popular online DIY repair resource. They offer an entire section dedicated to resolving issues with various keyboard types, along with step-by-step instructions, screenshots, and even photographs.

The ultimate goal is to completely dry out the laptops. It might be a lengthy procedure that demands patience and caution, but with the appropriate guide, you should be fine.

If your laptops operated until the repair was completed, they will very certainly work once all of the moisture has been removed.

#1) Replacement Keyboard for HP Pavilion Laptop

Adhere to the methods outlined in this section for removing the keyboard.

Step 1: Remove the battery from your Pavilion notebook.

Step 2: Remove the lapotp’s lid.

Step 3: Disconnect the CD/DVD drive.

Remove the Phillips head screw that secures the keyboard to the device in step four (marked by a keyboard icon). Keep the replacement screw for the keyboard.

Step 5: Slide the display panel open and position the screen to one side.

Step 6: When supporting the laptop, click the exposed region of the keyboard in the release of the keyboard to partially remove the label from the top cover.

Step 7: Turn right and fully open the screen.

Step 8: Raise the back edge of the keyboard and flip it towards the notebook’s front to gain access to the ribbon keyboard cable and ZIF connector.

Step 9: Gently raise the ZIF keyboard connector’s locking bar and cut the ribbon keyboard cord. Take care not to damage the ribbon and ZIF connectors.

Step 10: Your keyboard has now been successfully removed.

#2) keyboard substitution

Utilize the keyboard replacement procedures detailed in this section.

Step 1: Invert the keyboard to gain access to the cable and connector.

Step 2: Connect the keyboard’s ribbon cable to the ZIF socket.

Take care not to damage the ribbon and ZIF connectors.

Step 3: Press the locking bar down to secure the ribbon cable in the connector.

Turn the keyboard over and align the tabs on the top cover with the tabs on the bottom cover.

Step 5: Lower the keyboard and click the keyboard’s borders to secure it to the computer.

Closing the display window, turning off the monitor, and replacing the screen on the base are the final steps.

Step 7: Change the CD/DVD drive.

Step 8: Replace the operation’s cover.

Step 9: Replace the battery.

FAQs ― How Much Does It Cost to Replace a Laptop Keyboard?

Is it worth replacing a laptop keyboard?

While most laptop keyboards may be replaced, some are easier and more affordable to replace than others.

Fortunately for you, the Dell Inspiron 1545 keyboard is one of the simplest to replace. As fate would have it, replacing the keyboard on this specific laptop is quite simple.

How long does it take to replace a keyboard on a laptop?

While your project may take less than an hour, they are still required to perform other tasks, such as replacing entire displays, logic boards, and more! The cosmos is not entirely prepared to serve you, correct? It would be beneficial if you also lined up for things.

What do you do when your laptop keyboard stops working?

On your Windows laptop, open Device Manager, locate the alternative keyboards, expand the list, pick Standard PS/2 Keyboard, and then update the driver. After the update is complete, verify that your keyboard functions properly. If not, the next step will be to uninstall and reinstall the driver.

When should I replace my laptop?

The majority of experts expect that a laptop’s life cycle will be between three and five years. It can persist for a longer period of time, but its utility is limited due to the components’ inability to execute complex programmes.